Kart Parts There are 363 products.
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
Accelerator Cable Lug Suit KA100, X30, Yamha J,...
Kart Cover Kartelli
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
Fuel Tank Fitting Kit complete with mount bolt
M10 Nyloc Nut Suit M10 Steering Column and M10 Kingpin
M10 Nyloc Nut Suit M10 Steering Column and M10 Kingpin
Stub Axle Bearing Spacer 10mm ID x 17.9 mm Long
Stub Axle Bearing Spacer 8mm ID x 17.9 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Wheel nut front stub axle spindle M14 nylock EACH
Wheel nut front stub axle spindle M14 nylock front wheel nut. EACH Regular replacement is recommended as nylocks wear from regular tightening
Overflow Bottle Cap Red
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm