Kart Parts There are 204 products.
Air Box Internal Filter RED NOTE: NOT IAME BRANDED
Internal air filter and rubber RED type Cheetah and X30 if your not racing AKA
OTK BS5 - BS6 Brake Pad - RED Compound - Compatible.
GO KART OTK BRAKE PAD RED COMPOUND OTK RED PAD Compatible
Fuel Line Kartelli Corse Professional Grade 100 m...
Kartelli Corse Professional Grade Karting Fuel Line 100 metre roll yellow. Also available by the metre.
Plastic Spacer Washer M6
Plastic Spacer Washer M6 Normally used on front crash bars as a bush.
Stub Axle Bearing Spacer 10mm ID x 22mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Blanking Plug For Temperature Sensor Hole
Blanking Plug for temperature sensor hole with copper washer thread M10 x 1 ( standard fitting )
Bead Locks set of 12 small
30mm Axle Collar 2 pc split type each
Pad Spring and Bolt
Cable Adjuster
Cable Adjuster Suits both ends of the accelerator cable carburettor as well as the chassis
Fuel Line Kartelli Corse Professional Grade Per...
Kartelli Corse Professional Grade Karting Fuel Line per metre Blue. Save more than 50% buying the 100m roll
Engine Mount OTK Magnesium 92 x 30 mm EV0038.D0F
Engine Mount OTK Magnesium Inclined 92 x 30 mm OTK Part No. EV0038.D0F Inclined Suit Rotax , IAME, Vortex e