Kart Parts There are 276 products.
Clutch Drum and 11 Tooth Sprocket suit IAME X30 KA100...
Clutch Drum suit IAME X30 , KA100 , RL Leopard or Cheetah 11 Tooth 4 bolt sprocket
KA100 CYLINDER REEDJET AUS KA100 BARREL
KA100 CYLINDER REEDJET AUS KA100 Barrel Part No. : IAA-01000 Pic Item Number : 013A Group Heading : HEAD
X30 Cylinder HEAD IAME Part No.: X30125040
CYLINDER GASKET 4/10 -TOP / X30 / KA100
CYLINDER GASKET 4/10 -TOP / X30 / KA100 Part No. : EBP-125045 Pic Item Number : 11 Group Heading : HEAD AND CYLINDER
CONNECT FOR WATER TEMPERATURE PROBE BLACK ANODIZED
X30 Drive Side Crank Shaft half IAME Part No.:...
X30 Drive side crank shaft half IAME Part No.: X30125385 Item No. on Diagram : 65
Engine Mount Slider Suit 28mm 30mm and 32mm
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
Stub Axle Bearing Spacer 10mm ID x 26.5mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Blanking Plug For Temperature Sensor Hole
Blanking Plug for temperature sensor hole with copper washer thread M10 x 1 ( standard fitting )
Washer Counter Sunk Alloy Gold Anodised M6 ( Small )
Washer Counter Sunk Alloy Gold Anodised Small used for floor tray mounting