Kart Parts There are 174 products.
Cheetah Crank Shaft Nut
17 mm nut, 2 per Cheetah engine 1 for the clutch drum, 1 for the flywheel. A small dot of thread glue is recommended during replacement
Cheetah Clutch Drum also suit Leopard
Cheetah Clutch Drum also suit Leopard RL Leopard NOT X30 ( we sell the X30 drum as well )
Reed Block
Alloy Cheetah Engine Reed Block. Also suits PRD Fireball and IAME RL Leopard (not X30).
Engine Mount Clamp 30mm x 125mm
Engine Mount Clamp 30mm x 125mm This is a SPEICAL 125mm wide mount clamp
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
IAME KA100 STOP BUTTON 22MM - RED - IFE-05003-PR
Air Box Internal Filter RED NOTE: NOT IAME BRANDED
Internal air filter and rubber RED type Cheetah and X30 if your not racing AKA
Clutch Drum and 11 Tooth Sprocket suit IAME X30 KA100...
Clutch Drum suit IAME X30 , KA100 , RL Leopard or Cheetah 11 Tooth 4 bolt sprocket
Teflon Crank Case Seal
Teflon Race Seal (sold individually)
Exhaust Header IAME RL Leopard or Cheetah
Exhaust Header Exhaust Header IAME RL Leopard or Cheetah Aftermarket Kartelli Corse Header