Kart Parts There are 625 products.
Little End Bearing IKO 14 x 18 x 16.5 Silver coated
Restrictor Cheetah Includes 2 x Exhaust Gaskets
AKA approve and homologated Cheetah Exhaust Restrictor. This restrictor reduces the horsepower of the Cheetah to a level to race in the AKA Class of TAG/R
Starter Motor suit most TAG engines Starter Rotax KA00...
Starter motor suit most TAG engines including Cheetah, Rotax, X30, RL Leopard, Vortex, Mini Rok etc Fireball requires a special short shaft starter available on request
50mm Rear Axle Hub Spacers
Cheetah Crank Shaft Nut
17 mm nut, 2 per Cheetah engine 1 for the clutch drum, 1 for the flywheel. A small dot of thread glue is recommended during replacement
Main Bearings 6205 bearings
Main Bearings 6205 bearings. Suit CHEETAH and RL Leopard Sold as EACH
Hose Fiting suit IAME RL Leopard or SQ Cheetah
Brass hose fitting with copper washer gasket, as used in the cylinder for water inlet and the thermostat cover for outlet in the head. suit IAME RL Leopard or SQ Cheetah
Exhaust Header IAME RL Leopard or Cheetah
Exhaust Header Exhaust Header IAME RL Leopard or Cheetah Aftermarket Kartelli Corse Header
Wheel Stud M8 suit hub
Wheel Stud M8 suit front and rear hubs GO KART STEEL WHEEL STUDS Wheel Stud 8mm thread for use on all modern Racing
