Kart Parts There are 175 products.
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
Sprocket Carrier 35mm Cast
GO KART ENGINE SPROCKET TO SUIT RL LE0PARD OR CHEETAH...
9 Tooth Front sprocket to suit Long Shaft Yamaha...
9 Tooth Front sprocket to suit Long Shaft Yamaha KT100S or KT100 clubman
Engine Tensioner Bolt M10 x 60mm
Wheel nut front stub axle spindle M14 nylock EACH
Wheel nut front stub axle spindle M14 nylock front wheel nut. EACH Regular replacement is recommended as nylocks wear from regular tightening
DID Chain SDH Heavy Duty 94 to 114 Link
- New
Brake Rod Clevis and Pin Standard Right Hand Thread M6...
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
chassis plug 32mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
