Kart Parts There are 156 products.
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
Clutch Springs NORAM White RPM Approx 3900 RPM NA030
Set of 2 Noram Clutch Springs NA030 White RPM Approx 3900 RPM
Engine Mount Bolt M10 x 50mm
Stub Axle Bearing Spacer 10mm ID x 26.5mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Chain Breaker 428
Chain Breaker to suit 428 Pitch Chain THIS IS USED ON SHIFTER AND HIRE KARTS.. Not the standard size kart chain which is 219 pitch
Washer Counter Sunk Alloy Black Anodised M6 ( Small )
Washer Counter Sunk Alloy Black Anodised Small. Used for floor mounting kits.
10 Tooth Front sprocket to suit short shaft Yamaha...
10 Tooth Front sprocket to suit Yamaha KT100S clubman
Rotax Sprocket Bearing Clutch Bearing and O-ring 632415
Cheetah Clutch Drum also suit Leopard
Cheetah Clutch Drum also suit Leopard RL Leopard NOT X30 ( we sell the X30 drum as well )
Plastic Spacer Washer M6
Plastic Spacer Washer M6 Normally used on front crash bars as a bush.
