Kart Parts There are 267 products.
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
chassis plug 32mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Fuel Pump Suit 4 stroke and 2 stroke
Sprocket Carrier 35mm Cast
GO KART ENGINE SPROCKET TO SUIT RL LE0PARD OR CHEETAH...
9 Tooth Front sprocket to suit Long Shaft Yamaha...
9 Tooth Front sprocket to suit Long Shaft Yamaha KT100S or KT100 clubman
Chain Breaker 428
Chain Breaker to suit 428 Pitch Chain THIS IS USED ON SHIFTER AND HIRE KARTS.. Not the standard size kart chain which is 219 pitch
Blanking Plug For Temperature Sensor Hole
Blanking Plug for temperature sensor hole with copper washer thread M10 x 1 ( standard fitting )
Carby Pop Off Gauge tool and Carburettor Adaptor
Bead Locks Kartelli Corse thumb tightening set of 3
Set of 3 Kartelli Corse thumb bead locks easy to tighten, thumbtightening beadlocks. Suitable for Douglas, OTK, Kartelli Corse and most quality brand rims
11 Tooth Front sprocket to suit Yamaha KT100S Short...
11 Tooth Front sprocket to suit Yamaha KT100S clubman
