Kart Parts There are 213 products.
Fully Enclosed Chain Guard extra straps
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
Chain Guard Mount Suit OTK Style Guard
Clutch Drum and 10 Tooth Sprocket suit IAME X30 KA100...
Clutch Drum suit IAME X30 , KA100 , RL Leopard or Cheetah 10 Tooth 4 bolt sprocket
Starter Motor PRD ONLY
Starter Motor PRD ONLY For starter motor to suit Rotax, Cheetah, RL, X30, Mini Rok etc.. See below.
Spark Plug Cap NGK TB05EMA Red - Last stock - NGK no...
Spark Plug Cap NGK TB05EMA Red Most common spark plug cap in karting.
Rotax 13 Tooth Sprocket Part Number 236872
Rotax 12 Tooth Sprocket Part Number 236872
Stub Axle Bearing Spacer 8mm ID x 23mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Switch Mounting Plate suit Rotax Cheetah
Wheel nut front stub axle spindle M14 nylock EACH
Wheel nut front stub axle spindle M14 nylock front wheel nut. EACH Regular replacement is recommended as nylocks wear from regular tightening