Kart Parts There are 207 products.
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
$4.95
Tax included
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
$3.45
Tax included
Frame Slider Protector. Bolts to the bearing hanger to...
$49.95
Tax included
Engine Mount Torque Plate
This is a 10mm solid steel plate that you can place between the engine and the engine mount The makes the engine ROCK SOLID and reduces any crank case flex.
$29.95
Tax included
Rear Crash Bar Mounting Bolt Short
$4.50
Tax included
Chain Alignment Laser suit 428 shifter kart chain and...
$189.95
Tax included
Tie Rod Adjustable Kit with rod ends Black single kit
$64.95
Tax included
Blanking Plug For Temperature Sensor Hole
Blanking Plug for temperature sensor hole with copper washer thread M10 x 1 ( standard fitting )
$8.95
Tax included
Wheel nut front stub axle spindle M14 nylock EACH
Wheel nut front stub axle spindle M14 nylock front wheel nut. EACH Regular replacement is recommended as nylocks wear from regular tightening
$2.25
Tax included
35 Pitch Chain 3 Meter Length
$92.80
Tax included