Kart Parts There are 302 products.
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
Accelerator Cable Round Braid
Kartelli Corse smooth running short accelerator cable with round lug Inner Cable 1260mm Braid Outer Cable 680mm
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
IAME KA100 and X30 Reed Block and Carburettor Gasket Kit
IAME KA100 and X30 Reed Block and Carburettor Gasket Kit
Rotax Main Jet 182 Rotax Part No.: MJ182
Rotax Main Jet 182 Rotax Part No.: MJ182
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
Rear Tyre MG Red
Rear MG Red Tyre. Good all round tyre AKA controlled tyre for many Classes. Great with restricted 125cc
Engine Tensioner Bolt M10 x 60mm
Rear Tyre MG Yellow
MG Yellow REAR tyre only. Very Sticky Tyre AKA controlled tyre for many high performance classes Great with unrestricted 125cc
