Kart Parts There are 292 products.
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
Accelerator Cable Round Braid
Kartelli Corse smooth running short accelerator cable with round lug Inner Cable 1260mm Braid Outer Cable 680mm
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
IAME KA100 and X30 Reed Block and Carburettor Gasket Kit
IAME KA100 and X30 Reed Block and Carburettor Gasket Kit
Rotax Main Jet 182 Rotax Part No.: MJ182
Rotax Main Jet 182 Rotax Part No.: MJ182
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
Carburettor overflow Silicone Hose Red OD 5mm ID 3mm
Carburettor overflow Silicone Hose Colour : Red OD = 5mm ID = 3mm Lenghth = 500mm
Number 7 decal Small red sticker Suit side pods
Kart number decal red small number 7 suit side pods. Made in three layers for easy application from 3M ScotchCal. AKA approved font and size.
Number 3 decal Large red sticker
Kart number decal red large number 3 suit nassa panel or number plate. Made in three layers for easy application from 3M ScotchCal. AKA approved font and size.