Kart Parts There are 468 products.
Starter Motor Gear Box Cap
Starter motor gearbox black plastic end cap <br> Can get smashed up if you break a chain.
Rotax Compatible 11 Tooth Sprocket, Locator Pin,...
Rotax 11 Tooth Sprocket, Locator Pinand insert bush Bush part number 233855 When using the 11 tooth sprocket on a Rotax engine
Tie Rod 265mm Black
Black Tie Rod 265 mm Suits most model and brands of karts Suits M8 left and right hand rod ends sold separately
Water Pump Bracket
This water pump bracket goes on a mounting clamp to be positioned where ever your chassis will allow it.
Rotax Balance Shaft Bearing Small 6302 Rotax Part No...
6mm Locking for Plastic brake line black
6mm Locking for Plastic brake line red LOCKING FOR BRAKE PIPE COVERED WITH INOX RED COLOUR
Brake Fitting 3 Way Fitting Normal Type
3 Way Fitting - Normal Type NORMAL CONNECTION THREE WAYS 6/4mm
Air Box Internal Filter RED NOTE: NOT IAME BRANDED
Internal air filter and rubber RED type Cheetah and X30 if your not racing AKA
Bearing 30mm Axle ID 30mm OD 62mm SB206zz
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
Brake Disc Carrier 50mm Gold 8mm Keyway
Brake Disc Carrier 50mm Gold 8mm Keyway
