Kart Parts There are 218 products.
Overflow Bottle Cap Red
Side Pod Bar Suit Evolution Both early model
Side Pod Bar Suit Evolution Both Budget model
Cable Adjuster
Cable Adjuster Suits both ends of the accelerator cable carburettor as well as the chassis
Hose Fiting suit IAME RL Leopard or SQ Cheetah
Brass hose fitting with copper washer gasket, as used in the cylinder for water inlet and the thermostat cover for outlet in the head. suit IAME RL Leopard or SQ Cheetah
Carburettor overflow Silicone Hose Red OD 5mm ID 3mm
Engine Mount
Engine Mount to suit 32mm frame PLEASE NOTE: Requires Engine Mount NUT to be inserted in the mount see below
Stub Axle Bearing Spacer 10mm ID x 22mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Engine Tensioner Bolt M10 x 60mm
Bead Locks Kartelli Corse thumb tightening set of 3
Set of 3 Kartelli Corse thumb bead locks easy to tighten, thumbtightening beadlocks. Suitable for Douglas, OTK, Kartelli Corse and most quality brand rims