Kart Parts There are 241 products.
Bearing 30mm Axle Sealed. These are heavy duty rubber...
Bearing 30mm Axle Sealed. These are heavy duty rubber lip seal bearings. Great for dirt or wet weather. ID = 30mm OD = 62mm SB206
Stub Axle 17mm Bearing OD 22mm x ID 8mm x 7mm 608zz
Stub Axle Bearing OD 22mm x ID 8mm x 7mm 608zz
Cheetah Flywheel Woodruff Key Ignition side
Cheetah Flywheel Woodruff Key Ignition side. This is slightly thinner than the clutch side woodruff key
Clutch Drum and 10 Tooth Sprocket suit IAME X30 KA100...
Clutch Drum suit IAME X30 , KA100 , RL Leopard or Cheetah 10 Tooth 4 bolt sprocket
Hose Fiting suit IAME RL Leopard or SQ Cheetah
Brass hose fitting with copper washer gasket, as used in the cylinder for water inlet and the thermostat cover for outlet in the head. suit IAME RL Leopard or SQ Cheetah
Tie Rod Rose Joint M8 PHS8 Right Hand Tread
Tie Rod Rose Joint M8 Right Hand Tread Suit older style tie rods
Steering Column Bearing Suit M8 shaft OTK Arrow etc
Tyre set MG Yellow
Switch Mounting Plate suit Rotax Cheetah
Go Kart Tyre Tongs Tyre Tool Tire Tongs Kart tyre...
Rear Tyre Dunlop SL1A RACING SLICK TYRE REAR 11 X 7.1-5
Rear Tyre Dunlop SL1A RACING SLICK TYRE REAR 11 X 7.1-5 Long wearing, KA controlled tyre.
