Kart Parts There are 185 products.
Air Box Internal Filter RED NOTE: NOT IAME BRANDED
Internal air filter and rubber RED type Cheetah and X30 if your not racing AKA
Bearing 50mm Axle 90mm OD
The is a 50mm rear axle bearing Suit most karts ID ( inside diameter ) = 50 mm OD ( outside diameter )
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
Accelerator Cable Round Black Long
Fuel Line Kartelli Corse Professional Grade Per...
Kartelli Corse Professional Grade Karting Fuel Line per metre Blue. Save more than 50% buying the 100m roll
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
Plastic Spacer Washer M6
Plastic Spacer Washer M6 Normally used on front crash bars as a bush.
Tie Rod End POS8 Set of 2
SPECIALLY MADE FOR KARTING HEAVY DUTY By Kartelli Corse Set of 4 &nb
Tie Rod Adjustable Kit with rod ends Black single kit
Front Stub Axle Wheel Spacer 10mm x 17mm GOLD
Stub axle wheel spacer 10mm x 17mm gold anodised
Bearing 40mm x 80mm zz
Bearing 40mm x 80mm zz rear axle bearing Suit most karts ID ( inside diameter ) = 40 mm OD ( outside diameter ) = 80 mm
