Kart Parts There are 231 products.
Axle Key 6mm x 6mm x 60mm
Bearing 50mm Axle 90mm OD
The is a 50mm rear axle bearing Suit most karts ID ( inside diameter ) = 50 mm OD ( outside diameter )
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
Cheetah Ignition Coil
Accelerator Cable Clamp BLACK
Accelerator Cable Clamp Black anodised Prevents cables from breaking under vibration by exerting clamp pressure over a greater area. For use on Brake, Throttle Cables, Exhaust...
IAME RL LEOPARD and Early Model IAME X30 IGNITION COIL...
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
Steering Column Bearing Suit M10 shaft
Seat Washers Counter Sunk Alloy Black Anodised Pack...
Blanking Plug For Temperature Sensor Hole
Blanking Plug for temperature sensor hole with copper washer thread M10 x 1 ( standard fitting )
Wheel nut front stub axle spindle M14 nylock EACH
Wheel nut front stub axle spindle M14 nylock front wheel nut. EACH Regular replacement is recommended as nylocks wear from regular tightening
