Kart Parts There are 304 products.
Caster Adjusters M10 suit 22mm hole in chassis
Bearing 50mm x 90 Axle Sealed. These are heavy duty...
Bearing 50mm x 90 Axle Sealed. These are heavy duty rubber lip seal bearings. Great for dirt or wet weather.
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
X30 RL Leopard SQ CHEETAH Clutch Drum Bearing
Fuel Line T connection
Fuel Line Y connection Suit fuel line ID 5mm OD 9mm ( standard kart fuel line )
Tie Rod Rose Joint M8 PHS8L Left Hand Tread
Tie Rod Rose Joint M8 Left Hand Tread Suit older style tie rods
Stub Axle Bearing Spacer 10mm ID x 26.5mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Floor Tray Rubber Washer M6 - Black
Bead Locks set of 12 medium
WHEEL RIM TYRE VALVE
WHEEL RIM TYRE VALVE with CAP TO SUIT MAGNESIUM AND ALLOY
Bearing 50mm Axle 90mm OD
The is a 50mm rear axle bearing Suit most karts ID ( inside diameter ) = 50 mm OD ( outside diameter )
Rose Joint M6 standard Left Hand thread Suit: Brake Rod
Rose Joint M6 standard Left Hand thread Suit: Brake Rod