Kart Parts There are 359 products.
Brake Fitting 90 Degree Fitting Normal Type
90 Degree Fitting Normal Type NORMAL L PIECE UNION 1/8 - 6/4mm
Dent 2 spot brake shim 0.6mm
Side Pod Bar Suit most Karts - Left 500mm Centres 20mm...
Side Pod Bar Left NOTE: will fit Arrow and Monaco that have 20mm thick bars SOME are only 19mm.. Check before order Suit: Most Senior Karts
CRG Ven 8 Brake Pads - RED Compound - Compatible
Front Wheel Bearing Set 4 OD 42mm x ID 25mm x 9mm 6905zz
Front Wheel Bearing Set 4 x 25mm stub axle OD 42mm x ID 25mm x 9mm 6905zz
Rear Crash Bar Rubber Insert - suit 32mm
Brake Disc Carrier 40mm Floater suit Arrow Monaco
Brake Disc Carrier 40mm Floater suit Arrow Monaco 50mm X3-X1, M8, GP8 Arrow Brake Carrier Colour - Black DPE BRDH401
Brake Disc 195mm Floater
Brake Master Cylinder Boot RED
aster Cylinder Boot This is EXTREMELY Important to keep the dirt, track grime and water out of the master cylinder.
Cheetah Ignition Coil
Rear Crash Bar Bush
This is the bush that is inserted in the frame .This part wears over time so it should be replaced on a regular basis.