Kart Parts There are 173 products.
Kart Axle 40mm x 1040mm - Super Soft to Super Hard -...
Axle Prodezine 40mm 1040mm Hard WHITE Standard 8mm 2 Peg Keyways - OTK Compatible ( not included ) Choosing the Flexibility
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
Accelerator Cable Lug Suit KA100, X30, Yamha J,...
Weld On Bearing Hanger Bracket MIDDLE bearing
Weld On Bearing Hanger Bracket MIDDLE bearing For repairs to a damaged karts or the home kart builder
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
Stub Axle Bearing Spacer 10mm ID x 26.5mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Blanking Plug For Temperature Sensor Hole
Blanking Plug for temperature sensor hole with copper washer thread M10 x 1 ( standard fitting )
50mm Rear Axle Hub Spacers
Fuel Line Holder - black alloy by Kartelli Corse
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm