Kart Parts There are 258 products.
KA100 COPPER HEAD GASKET 0.05
COPPER HEAD GASKET 0.05 Part No. : IAA-40200-0.05 Pic Item Number : 10 Group Heading : HEAD AND CYLINDER
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
X30 Ring Gear Z70 Starter Drive Wheel NEW MODEL IAME...
X30 Ring Gear Z70 Starter driver WHEEL SUIT : X30125841 Clutch Hub IAME Part No.: X30125831 Item No. on Diagram : 362 &nb
CYLINDER GASKET 5/100 -TOP / X30 / KA100
CYLINDER GASKET 5/100 -TOP / X30 / KA100 Part No. : EBP-125048 Pic Item Number : 11 Group Heading : HEAD AND CYLINDER
CONNECT FOR WATER TEMPERATURE PROBE BLACK ANODIZED
X30 Drive Side Crank Shaft half IAME Part No.:...
X30 Drive side crank shaft half IAME Part No.: X30125385 Item No. on Diagram : 65
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
Stub Axle Bearing Spacer 10mm ID x 22mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
