Kart Parts There are 277 products.
Caster Adjusters M10 suit 22mm hole in chassis
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
Washer Counter Sunk Alloy Gold Anodised M8 ( Large )
Washer Counter Sunk Alloy Gold Anodised Large. Used for rear bearing hangers
50mm Rear Axle Hub Spacers Coloured
Engine Tensioner Bolt M10 x 100mm
Kart Axle 50mm 1030mm KZ OTK GENUINE - TYPE Q Super...
Floor Tray Rubber Washer M6 - Red
Brake Disc Carrier 40mm Floater suit Arrow Monaco
Brake Disc Carrier 40mm Floater suit Arrow Monaco 50mm X3-X1, M8, GP8 Arrow Brake Carrier Colour - Black DPE BRDH401
chassis plug 32mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts