Kart Parts There are 216 products.
Kart Axle 50mm 1030mm OTK GENUINE - TYPE Q Super Soft...
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Starter Motor Armature Suit TAG eng. Rotax IAME...
Starter Motor Armature SUIT TAG engines. Rotax IAME CHEETAH Rok ( except Fireball ) Even if you buy a new starter motor, rebuild your old one and keep it as a good spare. Also...
Plastic Spacer Washer M6
Plastic Spacer Washer M6 Normally used on front crash bars as a bush.
Stub Axle Bearing Spacer 10mm ID x 26.5mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Floor Tray Rubber Washer M6 - Black
Bead Locks set of 12 small
Engine Tensioner Bolt M10 x 100mm
Pad Spring and Bolt
chassis plug 32mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Starter Motor PRD ONLY
Starter Motor PRD ONLY For starter motor to suit Rotax, Cheetah, RL, X30, Mini Rok etc.. See below.
