Kart Parts There are 325 products.
Caliper Spacer Brake Shim 1mm Thick for rear brake...
Kart Axle 50mm 1030mm OTK GENUINE - TYPE Q Super Soft...
Brake Pads Suit ARROW MONACO OMEGA DENT BRAKES 11mm...
Bearing 50mm Axle 90mm OD
The is a 50mm rear axle bearing Suit most karts ID ( inside diameter ) = 50 mm OD ( outside diameter )
REAR BRAKE PAD CIK CRG VEN05 COMPARTIBLE RED
REAR BRAKE PAD CIK CRG VEN05 COMPARTIBLE RED
Brake Disc Carrier 50mm Floater suit Arrow Monaco
8mm Locking for Plastic brake line red
8mm Locking for Plastic brake line red LOCKING FOR BRAKE PIPE COVERED WITH INOX RED COLOUR
Brake Master Cylinder with reservoir
chassis plug 32mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Bearing Hanger BLACK Suit 40mm and 50mm Axles
M10 Nyloc Nut Suit M10 Steering Column and M10 Kingpin
M10 Nyloc Nut Suit M10 Steering Column and M10 Kingpin
Stub Axle Bearing Spacer 8mm ID x 23mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles