Kart Parts There are 296 products.
Caliper Spacer Brake Shim 1mm Thick for rear brake...
Kart Axle 50mm 1030mm OTK GENUINE - TYPE Q Super Soft...
Brake Pads Suit ARROW MONACO OMEGA DENT BRAKES 11mm...
Bearing 50mm Axle 90mm OD
The is a 50mm rear axle bearing Suit most karts ID ( inside diameter ) = 50 mm OD ( outside diameter )
COMPLETE FRONT BRAKE SYSTEM
Brake Mounting Nuts 2 off
Brake Caliper Mounting Nut sold as a pair. These are special locking nuts, as they have ro lock under extreme heat and normal Nylocks are not sufficient.
BRAKE PADS SET to suit KSI Mechanical Brakes
KSI GO KART BRAKE PAD Set of 2 / PAIR Suits:
EXHAUST MUFFLER REEDJET AUS KA100
EXHAUST MUFFLER REEDJET AUS KA100 Part No. : IAH-04000 Pic Item Number : 407 Group Heading : EX
Engine Mount 32mm x 125mm with 2 x 125mm mount clamp...
Engine Mount 32mm x 125mm with 2 x 125mm mount clamp suit older Tony Kart and Mike Wilson
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
Engine Mount Clamp Billet ultra strong
Engine Mount Clamp extruded billtet with a multifit profile to suit 28, 30 or 32 mm frames.