Kart Parts There are 163 products.
Brake Pads Suit ARROW MONACO OMEGA DENT BRAKES...
Brake Pads Suit ARROW MONACO OMEGA DENT BRAKES ULTIMATE 15mm Thick
Brake Rod Clevis and Pin Standard Right Hand Thread M6...
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
Nippon Denso Irdium Race Spark Plug IW27
Nippon Denso Irdium Race Spark Plug IW27 Suit Rotax All models IAME and Cheetah on cold days less than 25 degrees
Stub Axle Bearing Spacer 10mm ID x 26.5mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
NGK Spark Plug Lead Splicer
Tie Rod 235mm Black
Black Tie Rod 235 mm Suits most model and brands of karts Suits M8 left and right hand rod ends sold separately
Wheel Nuts tubular pack of 3
Wheel Nuts tubular Pack of 12
Dent 2 spot brake shim 0.6mm
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread