Kart Parts There are 138 products.
Engine Mount Clamp 30mm x 125mm
Engine Mount Clamp 30mm x 125mm This is a SPEICAL 125mm wide mount clamp
Cheetah Piston Ring
Cheetah Engine piston ring one size fits all. Ring end gap should be 0.4 to 0.45
Cheetah Piston Piston Ring Pin and clips
Cheetah Engine Oversize Piston NO BEARING INCLUDED
Reed Block
Alloy Cheetah Engine Reed Block. Also suits PRD Fireball and IAME RL Leopard (not X30).
Teflon Crank Case Seal
Teflon Race Seal (sold individually)
IAME RL LEOPARD and Early Model IAME X30 IGNITION COIL...
Starter Motor Armature Suit TAG eng. Rotax IAME...
Starter Motor Armature SUIT TAG engines. Rotax IAME CHEETAH Rok ( except Fireball ) Even if you buy a new starter motor, rebuild your old one and keep it as a good spare. Also...
Hose Fiting suit IAME RL Leopard or SQ Cheetah
Brass hose fitting with copper washer gasket, as used in the cylinder for water inlet and the thermostat cover for outlet in the head. suit IAME RL Leopard or SQ Cheetah
Engine Mount 32mm x 125mm with 2 x 125mm mount clamp...
Engine Mount 32mm x 125mm with 2 x 125mm mount clamp suit older Tony Kart and Mike Wilson
Engine Mount
Engine Mount to suit 32mm frame PLEASE NOTE: Requires Engine Mount NUT to be inserted in the mount see below
Engine Mount Bolt M10 x 50mm
