Kart Parts There are 221 products.

Active filters

  • Categories: Arrow Parts
  • Categories: Bearings and Flanges
  • Categories: Engine Parts - Cheetah
  • Categories: Hardware - Nuts Bolts Washes

Air Box Internal Filter RED NOTE: NOT IAME BRANDED

Internal air filter and rubber  RED type   Cheetah and X30 if your not racing AKA

$35.95 Tax included

Stub Axle Bearing 6900zz OD 22mm x ID 10mm x 6mm To...

Stub Axle Bearing 6900zz OD 22mm  x  ID 10mm   6mm thick   Can be used to get 10M kingpins into normal M8 stubs

$11.95 Tax included

Brake Mounting Bolt

Long M10 bolts for mounting the brake caliper

$9.95 Tax included

chassis plug 30mm

Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back  UNDER THE axle)  For when neatness counts

$3.45 Tax included

Clutch Drum and 10 Tooth Sprocket suit IAME X30 KA100...

Clutch Drum suit IAME X30 , KA100 , RL Leopard or Cheetah 10 Tooth 4 bolt sprocket

$89.95 Tax included

Plastic Spacer Washer M6

Plastic Spacer Washer M6   Normally used on front crash bars as a bush.

$0.95 Tax included

Starter Motor Bendix Gear Starter Pinion Gear

Starter Motor to suit Cheetah, Rotax, PRD , Vortex, IAME , X30, KA100,  Leopard and many other TAG kart engines.

$94.95 Tax included

Bead Locks Kartelli Corse thumb tightening set of 3

Set of 3 Kartelli Corse thumb bead locks easy to tighten, thumbtightening beadlocks. Suitable for Douglas, OTK, Kartelli Corse and most quality brand rims

$9.95 Tax included