Kart Parts There are 152 products.
Brake Safety Cable
chassis plug 32mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
Stub Axle Bearing Spacer 10mm ID x 26.5mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Blanking Plug For Temperature Sensor Hole
Blanking Plug for temperature sensor hole with copper washer thread M10 x 1 ( standard fitting )
Wheel Nuts tubular pack of 3
Wheel Nuts tubular Pack of 12
STRIKE CLUTCH KT100J suit Yamaha J 13 Tooth
Used on CADET 9 CADET 12 ROOKY, JUNIOR & SENIOR CLASSES Just plug in your external starter. Then just dr
Clutch Cover S Red Suit Italsport RED CLUTCH SYSTEM
ITALSPORT GO KART CLUTCH GUARD YAMAHA KT100S ENGINES ONLY YAMAHA KT100J AVAILABLE ON THIS SITE !!
Pedal Return Spring
Stub Axle Bearing Spacer 8mm ID x 23mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
