Kart Parts There are 117 products.
Cable Adjuster
Cable Adjuster Suits both ends of the accelerator cable carburettor as well as the chassis
Engine Mount 32mm x 125mm with 2 x 125mm mount clamp...
Engine Mount 32mm x 125mm with 2 x 125mm mount clamp suit older Tony Kart and Mike Wilson
Engine Mount Torque Plate
This is a 10mm solid steel plate that you can place between the engine and the engine mount The makes the engine ROCK SOLID and reduces any crank case flex.
Seat Washers Counter Sunk Alloy Gold Anodised Pack...
Seat Washers Pack of 8 Counter Sunk Alloy Gold Anodised
Bead Locks set of 12 small
Cable Clamp Flat 2 Screw
Engine Mount Clamp 30mm x 125mm
Engine Mount Clamp 30mm x 125mm This is a SPEICAL 125mm wide mount clamp
Engine Mount Slide Top Plate
Bead Locks set of 3 small
Bead Locks Kartelli Corse thumb tightening set of 3
Set of 3 Kartelli Corse thumb bead locks easy to tighten, thumbtightening beadlocks. Suitable for Douglas, OTK, Kartelli Corse and most quality brand rims
Carburettor Cable Clamp
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3