Kart Parts There are 154 products.
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
Main Bearings 6205 bearings
Main Bearings 6205 bearings. Suit CHEETAH and RL Leopard Sold as EACH
Stub Axle Bearing Spacer 10mm ID x 22mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Bearing 40mm x 80mm zz
Bearing 40mm x 80mm zz rear axle bearing Suit most karts ID ( inside diameter ) = 40 mm OD ( outside diameter ) = 80 mm
Brake Rod Clevis and Pin Standard Right Hand Thread M6...
Bearing 50mm x 90 Axle Sealed. These are heavy duty...
Bearing 50mm x 90 Axle Sealed. These are heavy duty rubber lip seal bearings. Great for dirt or wet weather.
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
GO KART WELD ON BEARING HANGER BRACKET FLANGE OFF-ROAD...
Weld On Bearing Hanger Bracket Type 3 Outer Bearing Hanger For repairs to a damaged karts or the home kart builder
M10 Nyloc Nut Suit M10 Steering Column and M10 Kingpin
M10 Nyloc Nut Suit M10 Steering Column and M10 Kingpin
Stub Axle Bearing Spacer 10mm ID x 26.5mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles