Kart Parts There are 193 products.
Cheetah 125cc Gasket and O Ring Kit
Cheetah engine gasket and oring kit Including the nylon head washers.
Front Wheel Bearing Set 4 OD 42mm x ID 25mm x 9mm 6905zz
Front Wheel Bearing Set 4 x 25mm stub axle OD 42mm x ID 25mm x 9mm 6905zz
Clutch Drum and 11 Tooth Sprocket suit IAME X30 KA100...
Clutch Drum suit IAME X30 , KA100 , RL Leopard or Cheetah 11 Tooth 4 bolt sprocket
Cheetah Flywheel Woodruff Key Ignition side
Cheetah Flywheel Woodruff Key Ignition side. This is slightly thinner than the clutch side woodruff key
Hose Fiting suit IAME RL Leopard or SQ Cheetah
Brass hose fitting with copper washer gasket, as used in the cylinder for water inlet and the thermostat cover for outlet in the head. suit IAME RL Leopard or SQ Cheetah
Steering Column Bearing Suit M8 shaft OTK Arrow etc
Tie Rod Adjustable Black single
Fully Adjust length tie rod Fully compatible with the Arrow Tie Rods From 210mm to 290mm
Fuel Line Holder - black alloy by Kartelli Corse
Bearing 30mm Axle ID 30mm OD 62mm SB206zz
Stub Axle Bearing 6900zz OD 22mm x ID 10mm x 6mm To...
Stub Axle Bearing 6900zz OD 22mm x ID 10mm 6mm thick Can be used to get 10M kingpins into normal M8 stubs
