Kart Parts There are 124 products.
Cheetah Piston Piston Ring Pin and clips
Cheetah Engine Oversize Piston NO BEARING INCLUDED
Hose Fiting suit IAME RL Leopard or SQ Cheetah
Brass hose fitting with copper washer gasket, as used in the cylinder for water inlet and the thermostat cover for outlet in the head. suit IAME RL Leopard or SQ Cheetah
Engine Mount OTK Magnesium 92 x 30 mm EV0038.D0F
Engine Mount OTK Magnesium Inclined 92 x 30 mm OTK Part No. EV0038.D0F Inclined Suit Rotax , IAME, Vortex e
Starter Motor Bendix Gear Starter Pinion Gear
Starter Motor to suit Cheetah, Rotax, PRD , Vortex, IAME , X30, KA100, Leopard and many other TAG kart engines.
Fuel Mixing Jug 5 litre with scale printed on the side
Tensioner Bracket Black
Cheetah Crank Shaft Nut
17 mm nut, 2 per Cheetah engine 1 for the clutch drum, 1 for the flywheel. A small dot of thread glue is recommended during replacement
Cheetah Clutch Drum also suit Leopard
Cheetah Clutch Drum also suit Leopard RL Leopard NOT X30 ( we sell the X30 drum as well )
Reed Block
Alloy Cheetah Engine Reed Block. Also suits PRD Fireball and IAME RL Leopard (not X30).
Engine Mount 32mm x 125mm with 2 x 125mm mount clamp...
Engine Mount 32mm x 125mm with 2 x 125mm mount clamp suit older Tony Kart and Mike Wilson