Kart Parts There are 123 products.
Cable Clamp Flat 2 Screw
Engine Mount Clamp 30mm x 125mm
Engine Mount Clamp 30mm x 125mm This is a SPEICAL 125mm wide mount clamp
Engine Mount OTK Magnesium 92 x 30 mm EV0038.D0F
Engine Mount OTK Magnesium Inclined 92 x 30 mm OTK Part No. EV0038.D0F Inclined Suit Rotax , IAME, Vortex e
Stub Axle Bearing Spacer 10mm ID x 26.5mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Bead Locks Kartelli Corse thumb tightening set of 12
Carburettor Cable Clamp
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
Engine Mount Torque Plate
This is a 10mm solid steel plate that you can place between the engine and the engine mount The makes the engine ROCK SOLID and reduces any crank case flex.
Stub Axle Bearing Spacer 8mm ID x 23mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles