Kart Parts There are 237 products.
Tensioner Bracket Black
Brake Rod Clevis and Pin Standard Right Hand Thread M6...
chassis plug 32mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Main Bearings 6205 bearings
Main Bearings 6205 bearings. Suit CHEETAH and RL Leopard Sold as EACH
EXHAUST MUFFLER REEDJET AUS KA100
EXHAUST MUFFLER REEDJET AUS KA100 Part No. : IAH-04000 Pic Item Number : 407 Group Heading : EX
X30 All Sizes 54.00 to 54.27 IAME Part No.: RING
X30 Ignition Side Crank Shaft Half IAME Part No.:...
X30 Ignition Side Crank Half IAME Part No.: X30125390 Item No. on Diagram : 66 To Suit :...
Engine Mount Slider Suit 28mm 30mm and 32mm
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
Stub Axle Bearing Spacer 10mm ID x 26.5mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Blanking Plug For Temperature Sensor Hole
Blanking Plug for temperature sensor hole with copper washer thread M10 x 1 ( standard fitting )
Bead Locks Kartelli Corse thumb tightening set of 3
Set of 3 Kartelli Corse thumb bead locks easy to tighten, thumbtightening beadlocks. Suitable for Douglas, OTK, Kartelli Corse and most quality brand rims