Kart Parts There are 233 products.
Cheetah Crank Shaft Nut
17 mm nut, 2 per Cheetah engine 1 for the clutch drum, 1 for the flywheel. A small dot of thread glue is recommended during replacement
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Clutch Drum and 10 Tooth Sprocket suit IAME X30 KA100...
Clutch Drum suit IAME X30 , KA100 , RL Leopard or Cheetah 10 Tooth 4 bolt sprocket
Plastic Spacer Washer M6
Plastic Spacer Washer M6 Normally used on front crash bars as a bush.
Number 6 decal Small red sticker Suit side pods
Kart number decal red small number 6 suit side pods. Made in three layers for easy application from 3M ScotchCal. AKA approved font and size.
Number 3 Black Large on Yellow background Numbers
Number 3 Black Large on Yellow background
Number 5 decal Large black sticker
art number decal Black large number 5 suit nassa panel or number plate. Made in three layers for easy application from 3M ScotchCal. AKA approved font and size.
Number 0 Black Large on Yellow background Numbers
Number 0 Black Large on Yellow background
Floor Tray Rubber Washer M6 - Black
Bead Locks Kartelli Corse thumb tightening set of 3
Set of 3 Kartelli Corse thumb bead locks easy to tighten, thumbtightening beadlocks. Suitable for Douglas, OTK, Kartelli Corse and most quality brand rims
