Kart Parts There are 263 products.

Active filters

  • Categories: Air Box and Air Filters
  • Categories: Axles and Accessories
  • Categories: Engine Parts - IAME X30 KA100 RL
  • Categories: Hardware - Nuts Bolts Washes

Brake Rod Clevis Pin 6mm

The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm

$4.95 Tax included

chassis plug 32mm

Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts

$2.95 Tax included

Bearing Hanger Gold 50mm Axles

Bearing Hanger Gold anodised alloy. Suit 50mm x 90mm setups

$59.95 Tax included

CYLINDER GASKET 5/100 -TOP / X30 / KA100

CYLINDER GASKET 5/100 -TOP / X30 / KA100   Part No. : EBP-125048   Pic Item Number  : 11     Group Heading : HEAD AND CYLINDER

$6.20 Tax included

X30 ConRod Kit IAME Part No.: IFC-50100-C

X30 Con Rod  Connecting Rod Kit   Complete with Conrod , Bearing, Pin, and star thrust washers   THIS IS A MATCH SET.. The clearance on conrods is +/-  .001 of a mm &nbsp

$489.00 Tax included

Stub Axle Bearing Spacer 8mm ID x 23mm Long

Stub Axle Bearing Spacer 8mm ID x 23mm Long   This is the spacer that goes between the top and bottom bearings in stub axle spindles

$3.49 Tax included

Blanking Plug For Temperature Sensor Hole

Blanking Plug for temperature sensor hole with copper washer   thread M10 x 1  ( standard fitting )

$8.95 Tax included

Bead Locks Kartelli Corse thumb tightening set of 3

Set of 3 Kartelli Corse thumb bead locks easy to tighten, thumbtightening beadlocks. Suitable for Douglas, OTK, Kartelli Corse and most quality brand rims

$9.95 Tax included

Bearing 40mm x 80mm zz

Bearing  40mm x 80mm zz  rear axle  bearing   Suit most karts     ID ( inside diameter ) = 40  mm OD ( outside diameter ) = 80 mm

$23.95 Tax included