Kart Parts There are 201 products.
Kartelli Pop Off Gauge Adaptor
Inlet Lever Height Gauge For: Walbro Carburetor Tillotson Carburetor Tryton Carburetor and similar that have a metering lever arm ...
Bead Locks Kartelli Corse thumb tightening set of 3
Set of 3 Kartelli Corse thumb bead locks easy to tighten, thumbtightening beadlocks. Suitable for Douglas, OTK, Kartelli Corse and most quality brand rims
Engine Tensioner Bolt M10 x 100mm
Red Clutch Yamaha KT100J Yamaha J 10T Clutch
Air Box Internal Filter RED NOTE: NOT IAME BRANDED
Internal air filter and rubber RED type Cheetah and X30 if your not racing AKA
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
Accelerator Cable Inner Short Lug
chassis plug 32mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Ignition Module Suit Comer 1 217 280112 990
Go Kart Comer SW80 Ignition Module Suit : Comer SW 80 Aftermarket version of the Bosch 1 217 280112 990 module The genuine Bosch part is is no
Rotax Main Jet 182 Rotax Part No.: MJ182
Rotax Main Jet 182 Rotax Part No.: MJ182
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
10 Tooth Front sprocket to suit Long Shaft Yamaha...
10 Tooth Front sprocket to suit Yamaha KT100S clubman
