Kart Parts There are 119 products.
Blanking Plug For Temperature Sensor Hole
Blanking Plug for temperature sensor hole with copper washer thread M10 x 1 ( standard fitting )
$8.95
Tax included
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
$4.95
Tax included
Fuel Tank Bolt M8 - Black
$9.95
Tax included
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
$18.95
Tax included
chassis plug 32mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
$2.95
Tax included
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
$3.45
Tax included
Carburettor Cable Clamp
$16.95
Tax included
Cable Clamp Flat 2 Screw
$6.45
Tax included
Cable Adjuster
Cable Adjuster Suits both ends of the accelerator cable carburettor as well as the chassis
$3.95
Tax included
