Kart Parts There are 158 products.
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
Stub Axle Bearing Spacer 10mm ID x 22mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Blanking Plug For Temperature Sensor Hole
Blanking Plug for temperature sensor hole with copper washer thread M10 x 1 ( standard fitting )
Wheel nut front stub axle spindle M14 nylock EACH
Wheel nut front stub axle spindle M14 nylock front wheel nut. EACH Regular replacement is recommended as nylocks wear from regular tightening
Brake Safety Cable Clevis type 650mm
Bearing 30mm Axle Sealed. These are heavy duty rubber...
Bearing 30mm Axle Sealed. These are heavy duty rubber lip seal bearings. Great for dirt or wet weather. ID = 30mm OD = 62mm SB206
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
GO KART WELD ON BEARING HANGER BRACKET FLANGE OFF-ROAD...
Weld On Bearing Hanger Bracket Type 3 Outer Bearing Hanger For repairs to a damaged karts or the home kart builder
Pedal Return Spring
Stub Axle Bearing Spacer 10mm ID x 26.5mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles