Kart Parts There are 229 products.
10 tooth sprocket suit IAME X30 KA100 Can be used on...
Brake Master Cylinder Boot RED
aster Cylinder Boot This is EXTREMELY Important to keep the dirt, track grime and water out of the master cylinder.
Brake Fitting Straight Fitting Normal Type
Straight Fitting - Normal Type NORMAL STRAIGHT CONNECTION 1/8 - 6/4mm
Air Box Internal Filter RED NOTE: NOT IAME BRANDED
Internal air filter and rubber RED type Cheetah and X30 if your not racing AKA
Brake Disc OTK Compatible 206mm x 16mm Part No....
Complete Brake System suit 40mm axle
COMPLETE REAR BRAKE SYSTEM Brake Master Cylinder Brake Lines Brake Pads Brake Caliper / Self adjusting Brake Disc 195mm Floating 40mm Brake Carr
Brake Mounting Nuts 2 off
Brake Caliper Mounting Nut sold as a pair. These are special locking nuts, as they have ro lock under extreme heat and normal Nylocks are not sufficient.
BRAKE PADS SET to suit KSI Mechanical Brakes
KSI GO KART BRAKE PAD Set of 2 / PAIR Suits:
IAME Clutch Woodruff Key
Clutch Drum and 10 Tooth Sprocket suit IAME X30 KA100...
Clutch Drum suit IAME X30 , KA100 , RL Leopard or Cheetah 10 Tooth 4 bolt sprocket