Kart Parts There are 86 products.
Brake Rod Clevis and Pin Standard Right Hand Thread M6...
Plastic Spacer Washer M6
Plastic Spacer Washer M6 Normally used on front crash bars as a bush.
Stub Axle Bearing Spacer 8mm ID x 23mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Bead Locks set of 12 medium
Engine Tensioner Bolt M10 x 100mm
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
Engine Mount OTK Magnesium 92 x 30 mm EV0038.D0F
Engine Mount OTK Magnesium Inclined 92 x 30 mm OTK Part No. EV0038.D0F Inclined Suit Rotax , IAME, Vortex e
Seat Washers Counter Sunk Alloy Black Anodised Pack...
Washer Counter Sunk Alloy Black Anodised M6 ( Small )
Washer Counter Sunk Alloy Black Anodised Small. Used for floor mounting kits.
Seat Washer M8 Counter Sunk Alloy Black Anodised
Seat Washer Counter Sunk Alloy Black Anodised
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.