Kart Parts There are 197 products.
Engine Mount Bolt M10 x 35mm
$2.95
Tax included
Rear Crash Bar Mounting Bolt long
Rear Crash Bar Mounting Bolt long suit plastic rear crash bar
$4.50
Tax included
Stub Axle Bearing Spacer 10mm ID x 22mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
$3.49
Tax included
Chain Breaker 428
Chain Breaker to suit 428 Pitch Chain THIS IS USED ON SHIFTER AND HIRE KARTS.. Not the standard size kart chain which is 219 pitch
$84.95
Tax included
Washer Counter Sunk Alloy Black Anodised M6 ( Small )
Washer Counter Sunk Alloy Black Anodised Small. Used for floor mounting kits.
$2.49
Tax included
Rotax 11 Tooth Sprocket Part Number 236877
Rotax 11 Tooth Sprocket Part Number 236877 NOTE: When using the 11 tooth sprocket on a Rotax engine a insert bush is required and replaces
$49.95
Tax included
RED CLUTCH SPROCKET 11 TOOTH SHORT SHAFT KT100S
$60.95
Tax included
RED CLUTCH SPROCKET 10 TOOTH SHORT SHAFT KT100S
$60.95
Tax included
Axle Key 6mm 3 Peg
$11.95
Tax included
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
$3.45
Tax included
Fuel Pump Suit 4 stroke and 2 stroke
$39.95
Tax included
Engine Mount Bolt M10 x 50mm
$2.95
Tax included