Kart Parts There are 151 products.
Brake Safety Cable
Cable Clamp Flat 2 Screw
Rotax Exhaust Mounting Kit
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
Stub Axle Bearing Spacer 10mm ID x 22mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Blanking Plug For Temperature Sensor Hole
Blanking Plug for temperature sensor hole with copper washer thread M10 x 1 ( standard fitting )
Wheel nut front stub axle spindle M14 nylock EACH
Wheel nut front stub axle spindle M14 nylock front wheel nut. EACH Regular replacement is recommended as nylocks wear from regular tightening
Brake Safety Cable Clevis type 650mm
Kart Axle 50mm 1030mm OTK Compatible - 8mm 2 Peg...
Carburettor Cable Clamp
Exhaust Cradle Rubber Spacer
Rubber spacer for exhaust cradle. Minimises the vibrations transmitted into the chassis. Replace regularly.
GO KART WELD ON BEARING HANGER BRACKET FLANGE OFF-ROAD...
Weld On Bearing Hanger Bracket Type 3 Outer Bearing Hanger For repairs to a damaged karts or the home kart builder
