Kart Parts There are 205 products.
Cable Adjuster
Cable Adjuster Suits both ends of the accelerator cable carburettor as well as the chassis
X30 54,22 r Complete red PISTON IAME Part...
X30 54,22 r Complete red PISTON IAME Part No.: BP-25076-CR Item No. on Diagram : 52A...
X30 54,15 r Complete red PISTON IAME Part...
X30 54,15 r Complete red PISTON IAME Part No.: BP-25068-CR Item No. on Diagram...
CYLINDER GASKET 5/100 -TOP / X30 / KA100
CYLINDER GASKET 5/100 -TOP / X30 / KA100 Part No. : EBP-125048 Pic Item Number : 11 Group Heading : HEAD AND CYLINDER
IAME KA100 and X30 Reed Block and Carburettor Gasket Kit
IAME KA100 and X30 Reed Block and Carburettor Gasket Kit
X30 Ignition Side Crank Shaft Half IAME Part No.:...
X30 Ignition Side Crank Half IAME Part No.: X30125390 Item No. on Diagram : 66 To Suit :...
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
Pedal Bolt M8 Euro Style
Stub Axle Bearing Spacer 10mm ID x 26.5mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Blanking Plug For Temperature Sensor Hole
Blanking Plug for temperature sensor hole with copper washer thread M10 x 1 ( standard fitting )
