Kart Parts There are 143 products.

Active filters

  • Categories: Data Loggers
  • Categories: Engine Parts - Cheetah
  • Categories: Hardware - Nuts Bolts Washes
  • Brand: Kartelli

Cheetah Crank Shaft Nut

17 mm nut, 2 per Cheetah engine 1 for the clutch drum, 1 for the flywheel. A small dot of thread glue is recommended during replacement

$3.95 Tax included

chassis plug 30mm

Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back  UNDER THE axle)  For when neatness counts

$3.45 Tax included

Engine Mount Nut each

Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.

$2.60 Tax included

Stub Axle Bearing Spacer 8mm ID x 23mm Long

Stub Axle Bearing Spacer 8mm ID x 23mm Long   This is the spacer that goes between the top and bottom bearings in stub axle spindles

$3.49 Tax included

Brake Mounting Bolt

Long M10 bolts for mounting the brake caliper

$9.95 Tax included

chassis plug 32mm

Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts

$2.95 Tax included