Kart Parts There are 238 products.
Caster Adjusters M10 suit 22mm hole in chassis
$109.95
Tax included
Cheetah Crank Shaft Nut
17 mm nut, 2 per Cheetah engine 1 for the clutch drum, 1 for the flywheel. A small dot of thread glue is recommended during replacement
$3.95
Tax included
Clutch Drum and 10 Tooth Sprocket suit IAME X30 KA100...
Clutch Drum suit IAME X30 , KA100 , RL Leopard or Cheetah 10 Tooth 4 bolt sprocket
$89.95
Tax included
Engine Mount Bolt M10 x 50mm
$2.95
Tax included
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
$2.60
Tax included
11 tooth sprocket suit IAME X30. Can be used on RL or...
12tooth sprocket suit IAME X30. Can be used on RL or CHEETAH with the X30 type clutch drum.
$43.95
Tax included
Engine Mount Slider Flat Suit 28mm 30mm and 32mm
$183.95
Tax included
Clutch Drum and 11 Tooth Sprocket suit IAME X30 KA100...
Clutch Drum suit IAME X30 , KA100 , RL Leopard or Cheetah 11 Tooth 4 bolt sprocket
$94.95
Tax included
X30 RL Leopard SQ CHEETAH Clutch Drum Bearing
$16.95
Tax included
Exhaust Header IAME RL Leopard or Cheetah
Exhaust Header Exhaust Header IAME RL Leopard or Cheetah Aftermarket Kartelli Corse Header
$85.00
Tax included
Engine Mount Clamp Billet ultra strong
Engine Mount Clamp extruded billtet with a multifit profile to suit 28, 30 or 32 mm frames.
$24.95
Tax included
GO KART ENGINE SPROCKET TO SUIT RL LE0PARD OR CHEETAH...
$44.95
Tax included