Kart Parts There are 249 products.
Brake Pads Suit ARROW MONACO OMEGA DENT BRAKES...
Brake Pads Suit ARROW MONACO OMEGA DENT BRAKES ULTIMATE 15mm Thick
Brake Cable Ball End Inner Cable 1900mm
CRG Ven 8 Brake Pads - RED Compound - Compatible
Brake Disc 210mm x 12mm twin groved not drilled
Brake Disc Carrier 50mm Floater suit Arrow Monaco
Brake Master Cylinder Boot BLACK
Master Cylinder Boot This is EXTREMELY Important to keep the dirt out of the master cylinder.
Brake Master Cylinder Gold
Piston in the Master Cylinder is 21mm or 7/8 inch. diameter. This Master Cylinder is a quality Italian part that could be adapted to
Pedal Grip Gold SET
Pedal grip with grub screw mount in gold. These Pedal Grips are 70mm long with a nominal tube size of 14mm
Rear Hub Suit 40mm Axle 90mm long Gold Anodised
Rear Hub Suit 40mm Axle 90mm long Gold Anodised. Buy a set and receive 6 tubular wheel nuts.
Front Mini Hub Black 95 x 25mm Stub Axles
Front 95mm Hub Large Black Suit 25mm Stub Axles
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
Stub Axle Bearing Spacer 8mm ID x 23mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
