Kart Parts There are 217 products.
Brake Fitting Straight Fitting Normal Type
Straight Fitting - Normal Type NORMAL STRAIGHT CONNECTION 1/8 - 6/4mm
Axle Medium 50mm
Axle Medium 50mm x 1010mm 8mm Keyway with 2 Peg ( euro sytle ) Black Heat Treated.
Bearing 30mm Axle ID 30mm OD 62mm SB206zz
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
Brake Mounting Nuts 2 off
Brake Caliper Mounting Nut sold as a pair. These are special locking nuts, as they have ro lock under extreme heat and normal Nylocks are not sufficient.
BRAKE PADS SET to suit KSI Mechanical Brakes
KSI GO KART BRAKE PAD Set of 2 / PAIR Suits:
GO KART WELD ON BEARING HANGER BRACKET FLANGE OFF-ROAD...
Weld On Bearing Hanger Bracket Type 3 Outer Bearing Hanger For repairs to a damaged karts or the home kart builder
European Alloy Pedal Extensions. Suit bar type pedals....
Stub Axle Bearing Spacer 10mm ID x 26.5mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
