Kart Parts There are 136 products.
Bearing 50mm x 90 Axle Sealed. These are heavy duty...
Bearing 50mm x 90 Axle Sealed. These are heavy duty rubber lip seal bearings. Great for dirt or wet weather.
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
Little End Bearing IKO 14 x 18 x 16.5 Silver coated
Bearing Hanger Gold Suit 40mm and 50mm Axles
Bearing Hanger Suits most Karts with 40mm and 50mm setups
Tie Rod End POS8 Set of 4
SPECIALLY MADE FOR KARTING HEAVY DUTY By Kartelli Corse
Blanking Plug For Temperature Sensor Hole
Blanking Plug for temperature sensor hole with copper washer thread M10 x 1 ( standard fitting )
Wheel nut front stub axle spindle M14 nylock EACH
Wheel nut front stub axle spindle M14 nylock front wheel nut. EACH Regular replacement is recommended as nylocks wear from regular tightening
Wheel Nuts tubular Pack of 12
Bearing 50mm Axle 90mm OD
The is a 50mm rear axle bearing Suit most karts ID ( inside diameter ) = 50 mm OD ( outside diameter )
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
Main Bearings 6205 bearings
Main Bearings 6205 bearings. Suit CHEETAH and RL Leopard Sold as EACH